Car
New & Used Cars FAQ » Car » 1967 ford mustang

1967 ford mustang

Are you looking for a 1967 ford mustang? Check out the Trusted Automotive Market Place LemonFree.com

Q: How much will i get for a 1967 Ford Mustang Coupe 3 speed good condition?
I have a 1967 Ford Mustang Coupe 6 cylinder 3 Speed in good condition. I just got the floor, ceiling, and drivers seat redone.

A: Is it 6cyl. or 289 c-code. 6cyl—$4,000 to $6,000. 289—$5,000 to $8,000. good luck

Q: What is the best type of motor oil for a 1967 Ford Mustang?
I just came into possession of a 1967 Ford Mustang but have no clue about the car and wanted to know what the best type of oil to use on an older car?

A: A 10w-30 oil of your choice.

Q: Would a 1967 Ford Mustang Coupe be a good first car for a 16 year old?
I am 16 and I really want a 1967 Ford Mustang Coupe. It is my dream car. I found one for cheap and I really want to get it, but I’m not sure if it would be a good choice as my first car. So, help? [=
When I said it was cheap, I meant it as that it isn’t as much as most 1967’s would be.
And I understand that it would most likely take some fixing up. I am all for that.

A: I would have to say that it is probably not a good idea. The biggest problem you will have is reliability. Older cars were never as reliable as they are now, and being 42 years old is only going to make that worse. A classic Mustang that is “cheap” is going to cost you in the long run.

Get something a little more modern for your 1st car. There are plenty of years left to own Mustangs, and when you have more money you will be able to afford one that is in good condition.

Q: I am looking for a 1967 ford mustang?
I am wanting to buy a 1967 Ford Mustang. I am trying to figure out what exactly I am looking for. I want a fully loaded 67′. What options does a 67′ fully loaded mustang have?
I would only look at coupes. No fast backs, or convertables.
What does a 1967 California Special have for options?

A: Here you go.

http://bradbarnett.net/mustangs/timeline/67-68/67/index.htm

Q: Where can I find a car shop in Los Angeles, CA that can do a ground up restoration on a 1967 Ford Mustang GT?
Im thinking of buying this 1967 Ford Mustang GT from a friend. The only problem is the car is a complete dust bunny!!! Nothing works and the body looks like its been chewed up and spat back out. Lol. But it is one of my dream cars and i have no problem paying for it to be restored…im just not comfortable shipping it halfway across the country.

Any suggestions will do. Thanx.

A: join this group for lots of help and suggestions,

http://groups.yahoo.com/group/classicmustang

Q: where can i find a turbocharger for my 1967 ford mustang?
i have 1967 289 ford mustang and i am lookin to buy a turbocharger for it..i have no idea where i can find one at…i know they make them..i need like a web address or something..thank you sooo much

A: I wouldn’t go with the turbo charger on a v8. I would go with a blower get better results.

Q: how to put a v8 in a 1967 ford mustang coupe?
im not sure were to start really.

im buying a 1967 ford mustang coupe and i want to put a v8 in it.

i need some direction on where to start on something like this.

any ideas?(:

A: You are lucky. Mustangs were redesigned for the 67 year/model so the big block engines would fit. That means any small or big block wil fit. (OHV only). The easiest way is to go to a junk yard and get all of the parts you need, engine mounts, cross member, etc. Keep an eye on that “donor car” because odds are you will have to go back a couple of times before the project is finished.

Just a tip, drill a hole through the hood hinges and into the hood web (not through the top of the hood!) then when you put the hood back on use these holes and two drill bits to align the hood. This will save much flustration.

Q: how much is a 1967 ford mustang gta worth?
how much is a 1967 ford mustang gta worth ? in general terms decent condition? please specify which currency you mean
cheers

A: While it’s a nice collectible it isn’t worth $100,000 U.S. as some believe. To get a reasonable idea go to http://www.nadaguides.com . Click on “classic” cars and then on “collectibles”. Depending on the body style, the engine, and other options it can run close to $30,000 U.S. The biggest thing though, with any collectible car is, “It’s only worth what someone will pay”.

Q: what is the best engine for a 1967 ford mustang gt fastback?
can i put a 4.6-liter SOHC V8 Engine in a 1967 ford mustang gt fastback?..
or whats the best engine for a 1967 ford mustang gt fastback?
tnx,,

A: FIRST THING-upgrade brakes!!! THEN- Depends on what you wanna do…#1-go computerized for best mileage with power, #2-do wheelstands every gear, or #3- GO FAST, burn gas! #1-You could put in an SOHC 4.6,*BUT* a DOHC would be better- you’ll have to install the engine electric, also( might as well use the tranny, too!) find a place to mount the computer, and make mount brackets(probably). And get dummy sensors for the smog If you wanna go brute power, #2-it IS (sorta) true that “there’s no substitute for cubes”( a big block/FE) but then, that’s just SORTA !-#3- I’ll put my 289 against an FE(or a 351Cleveland) any day!!

Q: Would you say a 1967 ford mustang is a good first car for a 15 year old girl?
Ive been saving my money since the week after my 14th bithday for the perfect car (or as perfect as you can get on a part-time minimum wage salary.) And i’ve got about 15 grand right now. My 16h b-day is in a few weeks and I wanna get a black ‘67 mustang. I already had my twin broter(he biult HIS car from scratch. It’s awesome) check the stang-in-question out. He says the car’s in good shape. But now I can’t help but wonder, should I really get this for my FIRST CAR? I mean it’s a pretty big deal and I don’t want to regret buying it 2 month’s from now. I guess my question is, do you think I should get the mustang? Have any of you had any expitence with a ‘67 mustang? If so do you recammend it?

Thanks in advance for your help.

A: Im 16 male that is such a badass car i was looking into old mustang to! But i live in Houston and dad finally made me realize how bad it would be. First a car like that is powerful and heavy and hard to control no power steering or anything. . Then gas is HORRIBLE. Repairs will come allot. Is it stick or Auto because if it stick Good luck going up ramps and such. and the worst reason no Airbags and its RWD unless you are a REALLY good rookie driver you are gunna slide off the road in rain. Its a dream car of many people but more of a collectors item Nice car when your 50 but not 16 But if you think you can handle it go for it

Q: how to remove a gas pedal from a 1967 ford mustang?
my mustang is missing the accelerator rod seal that rests on the firewall to prevent wind from coming into the car and i cannot figure out how to remove the pedal screw that holds the pedal on so i can replace it. does anyone know how to do it?
also are there any good places where i can buy a grommit for it?

A: much easier to cut the new seal and put it around rod and into fire wall will serve the same purpose once in place can’t tell it was ever split i did the same thing on a 65 falcon which is same setup.

Q: How much would a 1967 Ford Mustang GT 390 go for these days?
Its still has its original engine and its still in top running condition..
30k huh? Not bad, considering that the dealer is only asking for P250,000 (that’s Philippine Pesos, about $5,000)..Thought it needs a better paint job and the interior needs changing..Do you guys think its a good enough offer?

A: The 1967 Mustang big block is one of the most sought after collectible cars on the market.

It’s auction value will depend entirely on the option packages, the condition of the car and the originality.

The auction prices for a show condition original will start at $50,000 and could go much higher if it’s the right car at the right auction with the right buyers bidding.

Q: How much would a 1967 ford mustang 6 cylinder running fair condition sell for?
What would i get for this if i sold it. I bought the car for $2,500 and cleaned it up some. any idea how much it would run for?

A: 5,000 to 15,000

Q: How much would it cost to change a stick shift 1967 Ford Mustang Fastback?

A: Close to $2000 if you have it done… Restorods are very popular, depending how well it’s done will determine if you devalued it. A lot of people will tell you to keep it original, but it’s your car, build it the way you want..

Q: How much does a 1967 Ford Mustang cost?
A fastback, to be exact. My dad used to have this car before it was wrecked and always loved driving with him when I was a kid. Now I want this car for myself, but can’t seem to find it. I live in NYC, but am willing to travel for one wherever common.

But if found in NYC, where can I go for one, and what’s the average price tag for this classic beauty?

A: that is a very popular car, and even the beaters are expensive, a driver starts at $10k and up from there.. blame it on Eleanor ..

check all the classifieds and don’t forget ebay, even the parts section for parts cars and projects..

Related Posts

Write a comment